Google documents Google TV Bluetooth behavior in two sentences: you can connect several Bluetooth devices, like headphones or game controllers, but you can only connect one audio device at a time. Pairing runs through Settings, then Remote & Accessories. Google's article documents the connections, not the codecs: no codec enumeration appears anywhere in it, and the A2DP SBC floor is the only baseline any Bluetooth audio link can claim.
Figures on this page were checked September 2026. Every table row carries its source and access date.
The Google TV Bluetooth record
Google keeps its Google TV Bluetooth documentation in one help article, "Connect Bluetooth devices to Google TV", and the table below is that record compressed. Everything in it comes from Google's own text, not from retailer listings or forum workarounds.
| Item | What Google documents | Source / as of |
|---|---|---|
| Devices that pair | "several Bluetooth devices, like headphones or game controllers" | Google TV Help article, 2026-09-24 |
| Simultaneous audio | "You can only connect one audio device at a time" | Google TV Help article, 2026-09-24 |
| Pairing path | Settings, then Remote & Accessories, then Pair remote or accessory; confirm on the Bluetooth pairing request screen | Google TV Help article, 2026-09-24 |
| Reconnect path | Settings, then Remote & Accessories; under "Accessories," choose the device and select Connect | Google TV Help article, 2026-09-24 |
| Managing devices | Paired accessories stay listed in Remote & Accessories; Google notes you can rename or forget devices | Google TV Help article, 2026-09-24 |
| Codec enumeration | None. The article names no codecs; the A2DP SBC floor is the only documented baseline | Google TV Help article + A2DP 1.3.2, 2026-09-24 |
The one-audio-device rule
The rule sits in the article's second sentence, and it is a connection limit, not a pairing limit. A household can keep headphones, a game controller and a speaker paired simultaneously; when it is time for sound, one audio device holds the slot. Google's own troubleshooting step, disconnecting paired devices you are not using, reads differently once that limit is in view: it is the standard way to clear the slot for the device you actually want.
For movie nights the practical pattern is pair once, then use the reconnect path. The headphones appear under "Accessories" in Remote & Accessories, and Connect hands them the audio slot until something else takes it.
Pairing, step by step
Google's article gives three short flows worth keeping together. To pair: put the accessory in pairing mode or make it visible, open Settings, select Remote & Accessories, then Pair remote or accessory, pick the device from the list, and confirm Pair on the Bluetooth pairing request screen. To reconnect: open Remote & Accessories, choose the device under "Accessories," and select Connect. To fix a connection: power-cycle the accessory first, then work through the checks in Google's order, ending in a factory reset only when the accessory proves itself on other equipment.
Where Google TV sits
Google TV is the interface layer Google ships on its own streamers and licenses to TV makers, and the Android platform's Bluetooth audio stack underneath it is a separate record, kept on the Android platform page. The same one-audio-device sentence appears word for word in Google's help article for Chromecast Bluetooth audio, which adds a Fast Pair lane the generic Google TV article does not mention. Across the aisle, the Apple TV page shows the other house's shape: Apple names its headphone codec and stays silent on the rest, while Google documents connections and stays silent on all of them.
What this means in practice
- Headphone sessions: pair once, then treat Connect under "Accessories" as the switch that hands over the room's audio.
- Game night with headphones: controllers pair alongside the headphones, and the audio slot stays theirs; the controller connection is a separate lane.
- Codec expectations: with no codec list from Google, set expectations by the SBC floor plus the headphone maker's own documentation, the way this site's device pages do.
- Lip sync on TVs: if the picture runs ahead of Bluetooth audio, the fixes in our delay guide apply to any source device.
The one-audio-device sentence is Google describing how its platform behaves, in the same article that explains pairing. Reading it as a fault to be fixed leads to pointless settings changes; reading it as the documented design points you at the reconnect path instead.
FAQ
Several headphones can stay paired, but the connection rule is one audio device at a time, in Google's own words. Switching headphones means reconnecting from the Remote & Accessories list rather than playing to two at once.
Put the headphones in pairing mode, then open Settings, select Remote & Accessories, then Pair remote or accessory, and pick the headphones from the list. Google's article also covers the reconnect path from the same menu.
Google's help article documents pairing and connection limits, and it names no codecs at all, so there is nothing official to quote either way. Every A2DP link carries the SBC floor, and the codec above it depends on the TV build and the headphone. Check the maker's documentation before buying for codec reasons.
Google's troubleshooting order: power the headphones off and on, disconnect paired devices you are not using, try a different Bluetooth device to isolate the fault, unplug the TV for 10 seconds, and consider a factory reset when the headphones connect fine to other devices.
blafili B3 Bluetooth Receiver
XLR, RCA, optical and coax outputs with an OLED front panel, built on the QCC5125 + ES9018K2M platform. A wired amp or receiver, put on a wireless source.
- Google TV Help, Connect Bluetooth devices to Google TV: "You can connect several Bluetooth devices, like headphones or game controllers, to your Google TV. You can only connect one audio device at a time." Pairing runs through Settings, Remote & Accessories, Pair remote or accessory, with a Bluetooth pairing request screen to confirm. support.google.com/googletv/answer/10049908, accessed 2026-09-24
- Google TV Help, same article, troubleshooting steps: power-cycle the Bluetooth device; disconnect paired devices not in use; test a different Bluetooth device; unplug the TV for 10 seconds; factory reset as the last step when the device connects to other equipment normally. support.google.com/googletv/answer/10049908, accessed 2026-09-24
- Google TV Help, same article, device management: "Accessories that have been paired with your device appear in the Remote & Accessories section of Settings. You can also rename or forget devices." support.google.com/googletv/answer/10049908, accessed 2026-09-24
- Bluetooth SIG, A2DP 1.3.2 Section 4.2.1: SBC mandatory in sources and sinks. bluetooth.com/specifications/specs/advanced-audio-distribution-profile-1-3-2/, accessed 2026-09-24